產 品 綜 覽
2017 年熱門產品

4K UHD+ 產品

4K UHD 產品

μCS 控制系統

HDBaseT 產品 (48V PoH)

HDBaseT 產品 (100 公尺)

HDBaseT 產品 (70 公尺)

DisplayPort 產品

KVM 產品

SDI 產品

數位看板

模組化矩陣

HDMI 矩陣

HDMI 分配器

HDMI 切換器

矩陣、分配器與切換器

CAT5/6 延伸器

同軸與光纖延伸器

中繼器

HDMI 影像升頻器

DVI 影像升頻器

電腦與色差影像升頻器

影像降頻器

視訊格式轉換器

其他視訊處理

訊號產生器與 EDID 讀寫器

音訊解碼器

音訊格式轉換器

音訊擴大器與延伸器

其他音訊處理

其他產品

已停產產品

  產品顯示區

  4K UHD+ 產品  
產品編號:CH-1527TXV / CH-1527RXV
產品名稱:4K UHD+ HDMI over HDBaseT Transmitter (PSE) & Receiver (PD)
 

INTRODUCTION

This transmitter and receiver set is a great solution for extending UHD video and audio as well as Ethernet and control via a single run of Cat.5e/6/7 cable over distances up to 100 meters. This extender set complies with the advanced HDCP 2.2 and HDMI 2.0 standards, as well as supporting the legacy HDCP 1.x and HDMI 1.x standards. Despite HDBaseT’s 10.2Gbps bandwidth limitation, 4K UHD HDMI video sources, up to and including 4K@60Hz (4:4:4, 8-bit) as well as 10/12-bit sources with HDR, are able to be processed and extended by the use of AVLC (Adaptive Visually Lossless Compression) when needed. Multiple data and control interfaces are also provided, including IR, RS-232 and LAN connections. The Receiver (PD) is powered by 48V PoH (Power over HDBaseT) provided by the Transmitter (PSE), allowing for greater flexibility within different installation scenarios.

FEATURES

  • HDMI with HDR, 3D & 4K@60Hz support, DVI 1.0 compatible
  • HDCP 2.2 and HDCP 1.x compliant
  • Supports up to 4K UHD (18Gbps, 4K@50/60Hz 4:4:4, 8-bit) video input
  • Supports output resolutions up to 4K@50/60Hz (4:4:4, 8-bit)
  • Supports Deep Color input and output up to 12-bit
  • Supports 10-bit and 12-bit HDR bypass
  • Supports CEC bypass
  • Simultaneous transmission of video, audio and data over a single Cat.5e/6/7 cable up to 100m (328ft) at 1080p and 70m (246ft) at 4K
  • Supported HDBaseT feature set: HD Video & Audio, 100BaseT Ethernet, 48V PoH, and Control (Bidirectional IR/RS-232 pass-through)
  • Integrated AVLC (Adaptive Visually Lossless Compression) activates when the bandwidth requirements of the source are beyond 10.2Gbps (340MHz) allowing for support of sources up to 18Gbps (600MHz) with no loss of visual quality
  • The AVLC function allows manual selection between High Quality (Full bandwidth) mode and Standard mode (Lower bandwidth, useful for longer cable runs with 4K sources)
  • Supports standard IEEE 802.3 AT 48V PoH from Transmitter (PSE) to Receiver (PD) (compatible Receivers only)