產 品 綜 覽
2018 年熱門產品

4K UHD+ 分配、切換及延伸

4K UHD+ 視訊轉換

4K UHD+ 音訊轉換

4K HDR 延伸

48V PoH 產品 (100 公尺)

48V PoH 產品 (70 公尺)

24V PoC 產品 (100 公尺)

24V PoC 產品 (70 公尺)

μCS 控制系統

數位看板

模組化矩陣

HDMI 矩陣

HDMI 分配器

HDMI 切換器

其他矩陣、分配器與切換器

其他延伸器

中繼器

HDMI 影像升頻器

DVI 影像升頻器

電腦與色差影像升頻器

影像降頻器

視訊格式轉換器

其他視訊處理

音訊解碼器及擴大器

音訊格式轉換器

其他音訊處理

機架產品

SDI 產品

DVI 產品

KVM 產品

其他產品

已停產產品

  產品顯示區

  4K HDR 延伸  
產品編號:CH-1527TXPLV / CH-1527RXPLV
產品名稱:4K UHD+ HDMI over HDBaseT Transmitter (PSE) & Receiver (PD)
 

INTRODUCTION

This transmitter and receiver set is a great solution for extending UHD video and audio as well as Ethernet and control via a single run of Cat.5e/6/7 cable over distances up to 70 meters. This extender set complies with the advanced HDCP 2.2 and HDMI 2.0 standards, as well as supporting the legacy HDCP 1.x and HDMI 1.x standards. Despite HDBaseT’s 10.2Gbps bandwidth limitation, 4K UHD HDMI video sources, up to and including 4K@60Hz (4:4:4, 8-bit) as well as 10/12-bit sources with HDR, are able to be processed and extended by the use of AVLC (Adaptive Visually Lossless Compression) when needed. Multiple data and control interfaces are also provided, including IR and RS-232 connections. The Receiver (PD) is powered by 48V PoH (Power over HDBaseT) provided by the Transmitter (PSE), allowing for greater flexibility within different installation scenarios.

FEATURES

  • HDMI with HDR, 3D & 4K@60Hz support, DVI 1.0 compatible
  • HDCP 2.2 and HDCP 1.x compliant
  • Supports up to 4K UHD (18Gbps, 4K@50/60Hz 4:4:4, 8-bit) video input
  • Supports output resolutions up to 4K@50/60Hz (4:4:4, 8-bit)
  • Supports Deep Color input and output up to 12-bit
  • Supports 10-bit and 12-bit HDR bypass
  • Supports CEC bypass
  • Simultaneous transmission of video, audio and data over a single Cat.5e/6/7 cable up to 70m (230ft) at 1080p and 35m (115ft) at 4K
  • Supported HDBaseT feature set: HD Video & Audio, 48V PoH, and Control (Bi-directional IR/RS-232 pass-through)
  • Integrated AVLC (Adaptive Visually Lossless Compression) activates when the bandwidth requirements of the source are beyond 10.2Gbps (340MHz) allowing for support of sources up to 18Gbps (600MHz) with no loss of visual quality
  • The AVLC function allows manual selection between High Quality (Full bandwidth) mode and Standard mode (Lower bandwidth, useful for longer cable runs with 4K sources)
  • Supports standard IEEE 802.3 AT 48V PoH from Transmitter (PSE) to Receiver (PD) (compatible Receivers only)